Servo Upside down Special Machine Setting machining path and order is an important basis for optimizing machining procedures. It can be considered from the two aspects of processing trajectory and feed mode.

When the workpiece is NC milling, the appropriate feed mode should be selected according to the technical requirements of the workpiece to ensure the cutting accuracy and processing efficiency of the workpiece. When milling the outline of a flat workpiece, the cutting and cutting path of the tool should be arranged. Try to cut along the extended line of the contour curve, cutting out to avoid knife marks at the joint. At the same time, in the milling process, milling or reverse milling should be selected according to the workpiece.

Servo Upside down Special Machine Selection and proper installation of the manufacturer's tool

Whether it is CNC machining or ordinary machining, the tool acts directly on the workpiece, so the processing accuracy and surface quality of the workpiece are the most important factors in its selection and installation. In particular, the workpiece is machined on the Servo Upside down Special Machine and the tool is pre-stored in the tool library. After processing has begun, it may not be able to be replaced at will. Therefore, the general principles of tool selection are: easy installation and adjustment, good rigidity, durability and high precision.

Reasonable selection of cutting dose

The determination of the cutting amount is an important content of CNC machining technology, and its size is an important parameter of the main movement and feed movement of the machine tool, which has an important influence on the machining accuracy, processing efficiency and tool wear of the machine tool. The workpiece. The choice of cutting dose includes cutting speed, cutting capacity and feeding amount. The basic selection principle is: in the case of rigidity, roughing takes a larger cutting depth to reduce the number of cutting tools and improve the productivity of the workpiece; Finishing usually requires a smaller depth of cut for a higher surface quality.

Servo Upside down Special Machine https://www.zjshuangzheng.com/Servo-Upside-down-Special-Machine-SZ10-151106HV3-14VV.html